汽配人首頁 > 問答首頁

汽車類英語翻譯

1、For Body Structures, all "Air Float" type rotating turntables used for part load/unload shall incorporate a cycling hard stop that pivots in to provide location accuracy for the load/unload positions. The hard stop pivots out prior to the next rotation of the turntable.2、All pneumatic valve manifolds or manifold banks are to be shown and called outas having pressure and exhaust ports piped from both ends. Manifolds to have service for maximum flow.3、Manifold banks are limited to a total of six valve stations. Manifold banks with twoor more valves shall have two mufflers at each end for a total of four. Any manifold flowing lubricated air shall have a filter / reclassifier, one pipe size larger than the largest exhaust port, piped to each end of the manifold for a total of two.: 問提問者：網友 | 2017-10-12

最佳回答

1. 對于車身結構，用于部分負載/卸載的“氣流”式轉盤需合并到循環(huán)硬制動卡入，為負載/卸載位置提供精確定位。在進入下一輪轉動前，硬制動需拉出。2. 所有氣動閥組或閥組塊需顯示出來，并在入氣口和排氣口均顯示有氣壓。閥組可在最大氣流下工作。3. 閥組塊限于6個閥站。兩個或兩個以上的閥組塊需在每個端口裝2個消音器，共需4個。任何閥組的流動空氣需經過過濾/分級，泵的尺寸大于最大的排氣口，以將氣體泵進閥組的兩端。非汽車專業(yè)，請指教。: 回答者：網友

產品精選

我來回答