汽配人首頁 > 問答首頁

翻譯英文-起重機歷史

畢業論文要用，機器翻譯的不行，我英語實在太差，哪位高手幫忙翻譯一下萬分感謝，人名地名公司名不用翻譯，一定要通順。多謝各位朋友了。3天之內就要交。A significant word for the decade as far as the crane industry was concerned, was railways, as cranes for this industry were still very important. On 7 September 1949, for example, the Deutsche Bundesbahn (Federal German Railway) was founded. It needed high-capacity liftingdevices that could be taken to the job site as part of a train. Four steam-driven cranes, each of which could lift 57 tonnes, were ordered from Ardelt. In 1950 followed a special type of crane with a boom designed for working below overhead wires. The cranes featured a counterweight attachment system which was connected to the lifting gean This innovative design did not prove successful, but was replaced in 1955/56 by a similar hydraulic mechanism. Also in Germany, MAN had been actively building not just harbour, dockyard and travelling cranes, but also diesel-powered slewing cranes with pneumatic steering. These had been built since 1946 (picture 204), were driven by a 70 kilowatt six cylindertruck engine and could lift 6 tonnes at 7 metres radius and weighed 48 tonnes. A small concession to safety was also introduced as the company brochure tells us: "A load moment safety device, built in to the boom mechanism and thus linked to the lifting mechanism, cuts in if the permitted load moment is exceeded". The brochure writer realised the significance of the fact that the device acted when the load was exceeded and not "... as was the case ten years ago, at the point when the superstructurehas already tipped over!" These load moment safety devices, although a small part of the overall crane, were very important in the development of cranes (picture 205).: 問提問者：網友 | 2017-10-02

最佳回答

就起重機工業而言，二十世紀四十年代的一個重要詞匯是“鐵路”，因?yàn)槠鹬貦C(jī)對于鐵路行業來說仍然十分重要。例如，在1949年9月7日，Deutsche Bundesbahn（聯邦德國鐵路公司）成立。公司需要大載重量起重設備，將火車的一部分吊到工地現場。他們從Ardelt訂購了四臺起重量各57噸的蒸汽驅動起重機。1950年，出現了一種特殊的帶有懸臂設計的起重機，用于在高架電線下工作。這種起重機帶有一個連接到起重裝置上的配重附著系統。這種創新設計被證明并不成功，但它于1955/56年被一種類似的液壓機制所取代。也是在德國，MAN公司一直以來不僅積極制造港用、造船廠用和自走式起重機，還制造柴油動力驅動的帶有汽動轉向的旋臂式起重機。這種起重機自1946年起就開始制造（圖204），它由70千瓦六缸卡車引擎驅動，起重量6噸，起重半徑7米，自重48噸。公司還為了安全性作了一些小妥協而推出了一種裝置，其宣傳冊上寫著："這種載荷矩安全裝置內置于懸臂機制內，從而與起重機制相連，在載荷矩超過允許值時斷開"。宣傳冊的作者認識到設備在負載超過極限時需要有所動作的重要性，而非"... 如十年前那樣，上層構造已經到了翻倒的臨界點!"。盡管這種載荷矩安全裝置只是整臺起重機的一小部分，但在起重機的發展過程中起著非常重要的作用（圖205）。: 回答者：網友

產品精選

我來回答